2025 Ford F-150® in Shaker Heights, OH
The 2025 Ford F-150® enters the market with a feature set tailored for operational performance, load-bearing strength, and practical versatility. This model iteration does not introduce a new visual identity or design language, but instead integrates mechanical and technological updates that reinforce the platform’s utility in both commercial and private sectors. With expanded towing capabilities, a diversified powertrain catalog, updated onboard systems, and functional improvements to the interior and exterior, the 2025 Ford F-150® is structured to meet workload expectations without exceeding complexity.
Driver Assistance and Semi-Autonomous Capabilities
Driver support systems across trims are integrated through Ford Co-Pilot360® technologies. These include adaptive cruise control, lane-keeping assist, automatic emergency braking, and rear-view monitoring. BLIS® with Trailer Coverage extends rear blind spot detection to account for trailer length and width.
The available BlueCruise system supports hands-free operation on qualified road segments. It monitors driver input readiness, maintains vehicle speed and lane position, and adjusts distance relative to surrounding traffic. A forward-facing camera and radar system provide data to the control system to manage lane centering and braking functions.
Chassis Configurations for Off-Road Applications
Tremor® and Raptor® variants in the 2025 Ford F-150® lineup are designed for non-pavement environments and feature distinct mechanical enhancements. The Tremor® model incorporates a modified suspension geometry, 33-inch all-terrain tires, revised approach and departure angles, and increased ground clearance to manage uneven surfaces. Supplementary features include Trail Control™, which modulates throttle and braking automatically over rough terrain; Trail 1-Pedal Drive, which simplifies slow-speed crawling by combining throttle and braking into a single pedal; and Trail Turn Assist, which reduces turning radius in constrained environments by braking the inside rear wheel.
The Raptor® platform increases capability through a dedicated 3.5L High Output EcoBoost® engine, FOX™ internal bypass dampers, off-road calibrated suspension, and reinforced skid plates. The Raptor R™ escalates performance using the 5.2L Supercharged V8 for applications requiring extreme acceleration or terrain response. Both models include high-clearance running boards, Raptor-specific grilles, and off-road tire setups with beadlock-capable wheels in select configurations.
Electrical System Integration and Onboard Power
The 2025 Ford F-150® offers Pro Power Onboard™ as an integrated generator system. Depending on configuration, users can access up to 7.2 kW of electrical power through strategically located outlets in the cab and cargo bed. This system supports operation of jobsite tools, portable appliances, and remote equipment charging without the need for external generators.
Power availability is determined by engine selection and onboard battery capacity. Control panels allow real-time load monitoring and remote activation through connected applications.
Diverse Engine Architecture for Specific Demands
The 2025 Ford F-150® provides six distinct engine configurations, each designed with defined performance envelopes that cater to different usage scenarios. The base turbocharged 2.7L EcoBoost® V6 produces 325 horsepower and 400 lb.-ft. of torque. This engine serves applications requiring mid-range towing performance with reduced weight and offers a maximum towing capacity of 8,400 pounds alongside a 1,775-pound payload rating.
For users seeking greater torque delivery under load, the 3.5L EcoBoost® V6 supplies 400 horsepower and 500 lb.-ft. of torque. This engine is currently the towing leader in the 2025 Ford F-150® portfolio with a verified maximum towing capacity of 13,500 pounds and a payload limit of 2,440 pounds, providing a suitable option for intensive trailer applications.
The naturally aspirated 5.0L Ti-VCT V8 delivers 400 horsepower and 410 lb.-ft. of torque. It offers a towing capacity of 12,900 pounds and a payload rating of 2,225 pounds, offering V8 power for conventional performance requirements without turbocharging systems.
In hybrid configuration, the 3.5L PowerBoost® Full-Hybrid V6 combines internal combustion and electric propulsion. The system delivers 430 horsepower and 570 lb.-ft. of torque. This powertrain offers towing capabilities of up to 11,200 pounds and supports a payload of 1,750 pounds. It serves operators seeking increased torque under throttle while retaining moderate fuel efficiency.
High-output powertrains are reserved for specialty applications. The 3.5L High Output EcoBoost® V6, exclusive to the Raptor®, generates 450 horsepower and 510 lb.-ft. of torque. It supports a towing load of 8,200 pounds and a 1,400-pound payload. The Raptor R™ configuration includes a 5.2L Supercharged V8, producing 720 horsepower and 640 lb.-ft. of torque, rated for 8,700 pounds of towing and 1,400 pounds of payload.
Towing and Payload Infrastructure
Tow rating specifications for the 2025 Ford F-150® are directly linked to drivetrain selection, chassis setup, and bed configuration. Maximum towing is achieved using the 3.5L EcoBoost® V6 when equipped with appropriate towing packages and axle configurations. At 13,500 pounds, this rating supports fifth-wheel and large utility trailer demands.
Payload is optimized by the same engine, rated at 2,440 pounds. Structural reinforcements and axle load calibrations accommodate this upper limit, ensuring the bed and suspension system support the full rating without compromise.
To assist in trailer connectivity and movement, the 2025 Ford F-150® integrates multiple support systems. Pro Trailer Backup Assist™ and Pro Trailer Hitch Assist™ use camera systems and integrated sensors to align the hitch point and steer during reverse maneuvers, reducing input guesswork. Blind Spot Information System (BLIS®) with Trailer Coverage adjusts its monitoring range to account for trailer length and provides alerts when cross-traffic enters the detection zone.
Interior Composition and Onboard Systems
Cabin equipment varies by trim and package. The Platinum® Plus Package includes Smoked Truffle leather-trimmed seats with quilted patterns and integrates a B&O® Unleashed Sound System featuring 14 strategically placed speakers. This configuration maximizes in-cabin audio fidelity while preserving layout simplicity.
The King Ranch® model includes multicontour leather bucket seating and unique branding accents. Interior lighting and material selection are tailored to long-distance comfort and continuous daily use. An available twin-panel moonroof provides additional overhead visibility.
Infotainment and control functions are handled by SYNC® 4, supported by a high-resolution touchscreen interface and voice command protocols. Climate control zones, vehicle diagnostics, and navigation systems are accessible from the main control interface or via connected mobile applications.
Exterior Design and Functional Systems
The Pro-Access Tailgate system is a notable design addition. It provides multi-position access to the cargo bed and improves reach distance, especially when a trailer is connected. Step access and grab handles are built into the tailgate assembly for ease of use.
LED headlamps are standard, with available Dynamic Bending Headlamps that adjust beam angle up to 15 degrees based on steering input. These systems are engineered to improve nighttime visibility during directional changes without over-illuminating adjacent lanes.
Chassis length ranges from 209.1 inches to 243.5 inches, based on cab and bed configuration. Wheelbase measures approximately 145.5 inches in most SuperCrew® variants. Ground clearance is recorded at 8.4 inches, supporting light off-road use and water fording in applicable configurations. Front and rear track widths measure 68.1 inches and 68.3 inches respectively, providing lateral stability for both highway and off-road driving.
Visit Nick Mayer Ford East to Schedule a Test Ride
The 2025 Ford F-150® delivers a range of mechanical and electronic systems that serve practical use cases across industries and lifestyles. From heavy-duty trailering to integrated hybrid-electric systems, the model presents measured solutions through a platform that continues to evolve based on field requirements. To review model configurations or schedule a test ride, contact Nick Mayer Ford East in Shaker Heights, OH. Our team is available for vehicle walkarounds, option consultations, and ordering guidance across the full 2025 Ford F-150® lineup.